1. Introduction
this SDI to AV or CVBS converter supports many image enhancement and handling technology such as color conditioning, 3D denoise, interlacing/progressive video conversion, video amplification/scale, frame rate convert to guarantee image conversion meet professional quality standards. It can convert SDI signal to CVBS(AV), and our products can deal with resolution ratio, frame rate and image scaling of different interface. Audio signal that embedded in SDI could output to analog circuit output interface through separating and converting.
Our SDI to AV or CVBS converter supports remote control operation and could connect USB with PC for higher setup or firmware upgrading. it is equipped with free PC port management controlling software.
Our product is widely applied in multimedia broadcast, program production and edit in broadcasting and television, HD video information release, HD video remote transmission, video conference, multimedia advertisement and video security monitoring etc!
2. Main Features
●Support any SDI input format:
SD: 525i @ 59.94Hz, 625i @ 50Hz
HD: 720p @ 23.98Hz / 24Hz / 25Hz / 29.97Hz / 30Hz
720p @ 50Hz / 59.94Hz / 60Hz
1080i @ 50Hz / 59. 94Hz / 60Hz
1080p @ 23.98Hz / 24Hz / 25Hz / 29.97Hz / 30Hz
3G: 1080p @ 50Hz / 59.94Hz / 60Hz
●Support SMPTE 425M,SMPTE424M,SMPTE292M;
●With 1 CH SDI signal loop output；
●Share SDI embed audio and output to analog audio;
●High quality 10bit YUV4:2:2 conversion, keeping color not distortion;
●Professional image enhancement, denoise, color conditioning, de-interlace and scaling;
●Support OSD and menu operation windows；
●Support Interlace/Progressive interconversion & frame rate convert;
●AV(CVBS) signal output, choice for PAL/NTSC;
●Blue screen warning when the signal loss;
●Support users to choose specified output format by remote-controller and available setting for image output proportion (16:9/4:3 and image cutting)
| Model NO | FL-S2AV |
| Input interface | 1×BNC SDI |
| Input signal type | SD-SDI(270Mbps),HD-SDI(1.485Gbps), 3G-SDI(2.97Gbps) |
| Support input format | 525i 59.94,625i 50
720p 23.98/24/25/29.97/30/50/59.94/60
1080i 50/59.94/60
1080p 23.98/24/25/29.97/30/50/59.94/60 |
| SDI signal amplitude | 0.8 Vp-p |
| SDI impedance | 75 Ohm |
| SDI coupling type | AC |
| SDI signal jitter(typical) | SD-SDI≤0.1UI HD-SDI≤0.2UI 3G-SDI≤0.4 UI |
| Maximum output coax length | Belden 1694A: SD-SDI 400m,HD-SDI 200m,3G-SDI 140m
Notice:the test result will be different due to the above transmission distance depends on different coax |
| SDI loopback interface | 1×BNC SDI |
| SDI loopback output interface | 1×CVBS |
| Frequency band width | 165MHz/comply standard(CVBS 1.3) |
| Dimensions(cm) | 12*10*3.5 |
| Power supply | 5~24VDC |
3. Appliciation
|
|
SD/HD/3G SDI to CVBS(AV) Converter Images
|
